Shear Studs/Headed weld studs

Shear studs are referred to as headed weld studs or shear connectors. In the AISC Specification for Steel Buildings they are referred to as steel headed stud anchors, while DBAs are headless studs that resemble steel reinforcing bars or re- bar.

Our Advantages

1): Experience
We are professional manufacturer for fasteners with 15 years’ experience
2):Quality
Our factory has been verified by SGS With the advanced Taiwan production lines and experienced engineer and QC , the goods will be produced strictly to meet your request
3):Packing
Customers’logo and information can be printed on cartons
4):Warranty
We are very confident in our products,and we pack them very well to make sure the goods in well protection
5):Small Order
Small orders are accepted
6): Delivery Time
With the high production capacity & common goods in stock,both mass production and small orders are able to be delivered in short time

Name	Carbon steel cheese head iso 13918 welding shear studs
Standard	ISO 13918
Size	M6-M20
Material	Carbon steel
Grade	C1045
Finish	Plain
Usage	Steel structures, bridge, highway, railway, tower structures, power station, airport constructions, etc
Package	Bulk in carton, then on pallet, or according to customers’ requirement
Non-standards	OEM is available if you provide a drawing or sample.

Technical Data

Mechanical Properties of China IKING Shear Stud Connector
Hot sell Standard	Tensile strength	Yield strength	Elongation
EN ISO 13918 SD1	≥450 Mpa	≥350 Mpa	≥15%
AWS D1.1 TYPE B	≥450 Mpa	≥350 Mpa	≥15%
BS 5400	≥495 Mpa	≥385 Mpa	≥18%
AS/NZS 1554.2	≥410 Mpa	≥345 Mpa	≥12%
JIS B1198	≥400 Mpa	≥235 Mpa	≥20%
GB/T 10433	≥420 Mpa	≥340 Mpa	≥14%

Shear Stud Connector Type SD (ISO13918:2008) Dimensions (mm)
d1-0.4	10	13	16	19	22	25
d5±0.3	19	25	32	32	35	41
d3±0.3	13	17	21	23	29	31
h3±0.5	7	8	8	10	10	12
h4	2.5	3	4.5	6	6	7
l1±1.5	40~60	40~160	40~200	40~250	60~250	60~250
Burn off	3	3	4	5	5	6
Ferrule	UF10	UF13	UF16	UF19	UF22	UF25

Shear Stud Connector Type SC (AWS D1.1) Dimensions (inch)
	1/2-0.01	5/8-0.01	5/8-0.01	5/8-0.01
d5±1/64		1-1/4	1-1/4	1-3/8
h3	9/32	9/32	3/8	3/8
l1±1/16	2-5.9	2-7.874	2-9.84	3.15-9.84
Burn off	0.125	0.187	0.187	0.187
Ferrule	UF13	UF16	UF19	UF22